• New
SikaEmaco® T 1100 TIX - Noxan.pl

SikaEmaco® T 1100 TIX

Thixotropic, plastic concrete repair mortar — for trowel application on horizontal and sloped substrates. It features shrinkage-compensating properties and high strength.

SikaEmaco® T 1100 TIX is a one-component, fast-setting repair mortar with thixotropic properties, classified as R4 in accordance with the requirements of EN 1504-3.

The product is supplied as a dry, factory-prepared mix. The formula is based on sulphate-resistant Portland cement (HSR LA) and hydraulic binders, combined with sands with optimized grading. It also contains PAN polymer fibers (polyacrylonitrile) and modifying additives that ensure rapid strength gain — also at temperatures below 0°C, limited drying shrinkage, and increased durability under service conditions.

After mixing with water, a plastic, thixotropic consistency is obtained, intended for manual application. The mortar can be placed in layers with a thickness of 10–150 mm, maintaining good stability on inclined surfaces.

Applications of SikaEmaco® T 1100 TIX:

  • bedding of small and medium manhole frames,
  • installation and bedding of kerbs and paving blocks,
  • repairs of horizontal surfaces,
  • repairs of sloped surfaces,
  • indoor and outdoor works,
  • applications at low temperatures,
  • applications in demanding conditions where very short downtime / out-of-service periods are required.

Approximate consumption: to prepare 1 m3 of fresh mortar, approx. 1950 kg of SikaEmaco® T 1100 TIX is required.

One 25 kg bag yields approx. 12.9 l of mortar (actual yield depends on the amount of mixing water).

Delivery: 3–5 business days.

Packaging
zł9,102.00 brutto

zł7,400.00 netto

zł9.10 brutto za 1 kg
keyboard_arrow_down

Ask about the product

Very fast return to service

Very rapid strength gain - return to service after approx. 2 hours (at +20°C)

Easy application

Easy application

After adding gravel, application in thicker layers is possible

After adding gravel - application in thicker layers is possible

Key properties:

Application and execution conditions

  • easy application,
  • after adding gravel
    application in thicker layers is possible,
  • can be used at temperatures
    below zero down to -5°C.

Strength and crack reduction

  • very rapid strength gain
    return to service after approx. 2 hours (at +20°C),
  • high strength
    early and final,
  • low shrinkage,
  • minimized susceptibility to cracking
    thanks to PAN fibers.

Durability and service resistances

  • excellent adhesion
    and durability,
  • excellent resistance
    to freeze/thaw cycles,
  • high resistance to hydrocarbons,
  • very good slip resistance
    also in wet conditions.

Structural protection and compliance

  • very good reinforcement protection
    thanks to very low water absorption and good carbonation resistance,
  • CE marking in accordance with EN 1504-3
    R4-class cement mortar for structural and non-structural repair of concrete in buildings and civil engineering works, compliant with EN 1504-3:2005, with a declaration of performance based on a factory production control conformity certificate issued by a notified body certifying factory production control, bearing the CE mark.

Technical information

Compressive strength

  +20°C1) +5°C2) -5°C3)
2 hours ≥ 25 MPa – –
3 hours – ≥ 10 MPa ≥ 8 MPa
4 hours ≥ 35 MPa ≥ 15 MPa ≥ 12 MPa
1 day ≥ 60 MPa ≥ 55 MPa ≥ 50 MPa
7 days ≥ 70 MPa ≥ 65 MPa ≥ 65 MPa
28 days ≥ 85 MPa ≥ 85 MPa ≥ 85 MPa

1) Curing temperature, water and powder: +20°C

2) Curing temperature, water and powder: +5°C

3) Curing temperature: -5°C; water and powder temperature: +20°C

Modulus of elasticity in compression

Value 35 000 MPa
Standard (EN 13412)

Flexural strength

1 day ≥ 7 MPa
7 days ≥ 8 MPa
28 days ≥ 10 MPa

Shrinkage

28 days ≤ 0.300 mm/m

Pull-off strength

Adhesion to concrete / mortar 28 days ≥ 3.0 MPa
Adhesion to concrete after freeze–thaw cycles, mortar 28 days (50 cycles, de-icing salts exposure) ≥ 3.0 MPa

Reaction to fire

Class A1
Standard (EN 13501-1)

Capillary absorption

28 days ≤ 0.1 kg·m-2·h-0.5

Carbonation resistance

28 days meets dk ≤ that of control concrete

Service temperature

Range -30°C to +80°C

Ring test

Cracking tendency No cracks (up to 180 days)

Application

Mixing ratio

Water amount 3.1 to 3.6 l of water per 25 kg bag

Layer thickness

Repair mortar 10 - 100 mm
Installation mortar 25 - 150 mm

Product temperature

Minimum / Maximum Minimum +5°C / Maximum +30°C

Ambient temperature

Minimum / Maximum Minimum -5°C / Maximum +35°C

Substrate temperature

Minimum / Maximum Minimum 0°C / Maximum +30°C

Pot life

Time ~ 20 minutes at +20°C

(higher temperatures shorten the pot life, and lower temperatures extend it)

Load-bearing capability

Light traffic (+20°C) 60 minutes
Full load (+20°C) 120 minutes

Fresh mortar density

Value ~ 2.20 g/cm3

Consumption

Consumption per 1 m3 of fresh mortar approx. 1950 kg of SikaEmaco® T 1100 TIX
Yield from a 25 kg bag approx. 12.9 liters of mortar

Documentation:

PDF

Datasheets

Declarations

PDF