VOC-free (0 VOC) primer - DoPox® HeavyBond 30-33
DoPox® HeavyBond 30-33 is a two-component, emission-free epoxy primer (0 VOC) from a Danish manufacturer, designed for priming substrates that require better preparation. It is particularly recommended for priming concrete floors and:
- fresh and damp concrete* (see tests in accordance with DIN EN 13578:2004),
- substrates with oil residues (previously cleaned)**,
- substrates that require increased penetration,
- sanded tiles,
- steel.
HeavyBond 30-33 emission-free primer has very good adhesion to the above-mentioned substrates and can be applied under surfaces intended for heavy mechanical traffic. It has very good flow properties, making it ideal for creating epoxy repair compounds with quartz. It does not contain VOCs. After curing, it is a 100% solid material.
HeavyBond 30-33 zero-emission primer – key properties:
- two-component, solvent-free epoxy (2K) from a Danish manufacturer
- characterized by very good adhesion to many demanding substrates
- emission-free in accordance with DIN 13419, does not contain Volatile Organic Compounds
- suitable for many surfaces intended for heavy mechanical traffic
- allows the addition of quartz with varying grain sizes
- application with a roller or squeegee
Consumption: 0.3 kg/m2
More information about HeavyBond 30-33 emission-free primer.
* Concrete must be fully cured and free of water and liquids. It should also be insulated, i.e., not exposed to capillary action. This is particularly important for underground floors, where there may be significant and continuous moisture pressure. In the case of concrete on the ground, the potential moisture pressure is lower. Therefore, for example, in the case of terraces on the ground, HeavyBond 30-33 can be used directly, even on uninsulated concrete.
** For best results, the surface to be coated should be properly prepared by mechanically removing as much contamination as possible. If the primer is used on very dirty substrates, adhesion problems may occur.
Note: Epoxy primers such as HeavyBond 30-33 do not affect changes in concrete shrinkage. If a thick-film system is applied to a large concrete slab without sufficient expansion joints, this may lead to cracking of the resin on the surface. However, this does not change the fact that the primer will adhere well to the concrete.
Customers who bought this product also bought:
High-strength epoxy flooring - ProFloor Plus
Polyurethane coating - P101
Elastoflex - NCS colors from the mixer
3M painter's tape
Elastoflex flexible facade paint
Flexible anti-corrosion paint - Elastometal
Telescopic stick for painting
You might also like
Nylon paint roller 14 mm - 70 cm, 38 cm, 30 cm, 25 cm, 11 cm
Paint tray
Telescopic stick for painting
Super-Lock professional telescopic pole
3M painter's tape











-
light gray
zł147.60 brutto
zł120.00 zł netto
zł147.60 brutto za 1 kg
zł147.60 brutto
zł120.00 zł netto
zł147.60 brutto za 1 kg






















