Renewable coating for anti-graffiti protection Vernacryl 30
Vernacryl 30 is a single-use water-repellent protection that forms an easily washable anti-graffiti coating. The protection is renewable – after each graffiti removal, the protective layer disappears and a new layer of the product must be applied. The applied coating is easy to clean with hot water at a minimum temperature of 90°C under a pressure of 90 bar and/or with Scalpex NW paint remover. It does not yellow and has very high UV resistance. It is available in two finishes: matte and gloss.
Key properties:
- single-component (1K), semi-permanent, hydrophobic acrylic varnish
- highly resistant to UV rays, does not yellow
- creates a colorless, single-use anti-graffiti coating
- after each cleaning, a new protective layer must be applied (in the cleaned area)
- protects against all types of graffiti (paint, markers, ink, etc.)
- ensures easy removal of graffiti with hot water (min. temp. 90°C, pressure 90 bar) and/or with Scalpex NW
- It is vapor-permeable and does not require priming
- ideal for use on rough and porous substrates such as stone, brick, concrete, cement, wood, etc.
- can be used indoors and outdoors
- application with a roller or pressure sprayer
- available in two finishes: matte and gloss
Coverage: 5 - 6.67 m²/kg per coat, depending on the porosity of the surface*
System: 2 coats
More information about Vernacryl 30 renewable graffiti protection coating.
* Performance data is approximate. It allows you to estimate the amount of product needed to complete the job, but is not binding. Only testing under specific conditions will determine the exact performance on a given surface.
Instructions for use of Vernacryl 30 anti-graffiti coating:
- Vernacryl 30 must be mixed thoroughly before use. Once mixed, the product is ready for use and should not be diluted.
- Then apply the product to the surface in two intersecting layers, leaving an interval of 4 hours between layers and taking care not to apply too much product (the first layer should dry first).
The product can be applied with a roller or pressure sprayer. - The surface is effectively protected after approximately 72 hours (depending on the outside temperature).
Graffiti removal: Graffiti can be removed in two ways: with hot water at a temperature of at least 90°C under a pressure of 90 bar, or with Scalpex NW paint remover. In both cases, the protective layer disappears and must be renewed.
Instructional video:
Anti-graffiti coating - Scalp Vernacryl 30
