Static Guard 30-52 AS anti-static resin is a solvent-free, conductive epoxy system that forms a smooth, sealed, and non-porous coating with uniform conductivity—resistance to ground Ru < 1 × 106Ω according to EN 1081 and a walking test result < 100 V according to EN 61340-4-5.
The Static Guard 30-52 AS conductive floor is suitable for facilities with high traffic loads. It provides very high mechanical and chemical resistance and is easy to keep clean.
The Static Guard 30-52 AS anti-static resin is ideal for production facilities, warehouses, laboratories, cleanrooms, and areas where the risk of electrostatic discharge must be minimized.
The Static Guard 30-52 AS system can be used in EX zones / explosion-hazard zones, where a properly selected conductive floor supports the safe dissipation of electrical charges.
Static Guard 30-52 AS conductive resin is classified as fire resistance class Cfl-s1 (flame-retardant flooring), in accordance with EN 13501-1. It creates a resin flooring of class EN 13813: SR-B1,5-AR1-IR4.
Coverage: 2 kg/m2
More information about Static Guard 30-52 AS resin.
Note: With light colors, dark inclusions from the conductive fibers may be visible. Therefore, the actual color may be similar to the sample but not an exact match.
Conductive properties
Resistance
Aesthetics
Safe application
Application
| System type: | System per m2: | Coating thickness: | Cost per m2: |
|---|---|---|---|
| Static Guard 30-52 AS System A complete antistatic and ESD system for creating a new, self-levelling conductive floor, compatible with the selected type of ESD footwear.
|
1-2 x 0.25 kg of HeavyBond 30-33 primer + 0.25 lm of NX1106 copper tape + 1-2 x 0.15 kg of Static Guard 30-11 AS conductive resin + 2 kg of Static Guard 30-52 AS antistatic resin |
approx. 2 mm | check the cost |
| Static Guard 30-52 AS + 50-30 ESD System A complete antistatic and ESD system for creating a new conductive floor with an additional matt topcoat that increases the system’s compatibility with most types of ESD footwear.
|
1-2 x 0.25 kg of HeavyBond 30-33 primer + 0.25 lm of NX1106 copper tape + 1-2 x 0.15 kg of Static Guard 30-11 AS conductive resin + 2 kg of Static Guard 30-52 AS antistatic flooring + 2 x 0.1 kg of Static Guard 50-30 ESD antistatic paint |
approx. 2 mm | check the cost |
The systems presented are general recommendations. Each project should be treated individually. In case of any doubts, please contact us so that we can select the appropriate system for the specific problem.
Static Guard 30-52 AS Anti-static Resin
Volatile Organic Compounds content (VOC) - 0 g/l
* Information on the level of vapour emissions (VOC) during application and until the paint is fully cured.
Emission levels from A+ (very low) to C (high).
Additional information on Volatile Organic Compounds.
