Polyurethane surface - Hydrograff HP
od zł196.80
Hydrograff HP is a modern, water-based, two-component polyurethane coating with low VOC content. The coating is...
3D flooring - DoPox® EpoxyClearCoat 30-50 UV3
3D flooring DoPox® EpoxyClearCoat 30-50 UV3 is a two-component, transparent, thick-film, self-leveling epoxy resin for floors, allowing you to create an original finish. The resin is characterized by greater transparency for a better aesthetic effect. It is ideal for pouring onto resin floors, flooding quartz, or creating stone carpets.
Depending on requirements, 3D 30-50 UV3 transparent resin can be applied in thin and thick layers with a thickness of 0.2 to 1.5 mm*. A squeegee should be used for application. It is not recommended to apply thicker layers, as this affects the curing profile and may lead to imperfections in the cross-section of the cured surface.
Thanks to its special formula, the transparent thick-film resin EpoxyClearCoat 30-50 UV3 is highly resistant to UV radiation, which reduces yellowing**.
Key properties:
- two-component (2K), transparent epoxy from a Danish manufacturer
- excellent transparency
- high resistance to UV radiation, which significantly reduces yellowing
- modern solution for finishing floors in offices, corridors, garages, workshops, etc.
- after curing, it is a 100% solid material
- application with a squeegee in coatings with a thickness of 0.2 to 1.5 mm*
More information about 3D EpoxyClearCoat 30-50 UV3 floor resin.
* 3D EpoxyClearCoat 30-50 UV3 flooring can be applied in thin and thick layers with a thickness of 0.2 to 1.5 mm:
- We recommend applying a minimum of 0.5 kg/m² (i.e., approx. 0.4 mm) to achieve a uniform finish. When applying thinner layers, the resin may form so-called "broth eyes."
- It is also not recommended to apply layers thicker than 1.5 mm, as this affects the curing profile and may lead to imperfections in the cross-section of the cured surface.
** Thanks to its special formula, the 3D EpoxyClearCoat 30-50 UV3 floor has high UV resistance, which reduces yellowing. However, it should be remembered that when exposed to sunlight (e.g., large windows, sliding doors), yellowing may occur within a few years. To reduce this effect, the resin can be additionally finished with Hydrograff HP colorless varnish with UV filters or SmoothCoat PU Matt 50-10 matte varnish.
Customers who bought this product also bought:
Decorative loose glitter
od zł15.00
Decorative glitter in various colors for a shimmering finish. Glitter scattered on the floor gives it an original, decorative look. It is intended for use both indoors with epoxy floors and...
Garage flooring - Hydropox
od zł142.50
Hydropox creates a durable floor protection. It has high chemical and mechanical resistance. It is a two-component, water-based dispersion of epoxy resins that creates a satin finish. ...
Decorative flakes for floors
od zł44.00
Decorative flakes scattered on resin floors improve the appearance of the floor and mask unevenness and imperfections in the substrate. Applying flakes also provides an additional anti-slip...
You might also like
Quartz sand
od zł12.30
Naturally dried quartz sand with a grain size of 0.1 - 0.3 mm / 0.2 - 0.5 mm / 0.5 - 1.0 mm, intended for versatile use.
Quartz sand is ideal for use as:
an anti-slip...
Paint bucket
od zł30.75
Professional 15-liter paint bucket. Made of durable plastic. Stable , with a metal carrying handle. The paint bucket is equipped with rounded, smoothly...
3M painter's tape
od zł19.99
3M masking tape is a high-quality, long (50 m) paper masking tape designed for general industrial painting applications. The tape adheres very well and provides precise masking...
Resin mixer
od zł135.30
Professional resin mixer with double blade, made of galvanized steel. Reduces resin aeration. Designed for mixing all types of paints, resins, fillers, resin...
