RD-Aquasorb is a professional anti-condensation paint that absorbs excess moisture.
Special technology ensures that the applied coating absorbs water vapor when there is excessive moisture in the room and releases it as soon as the air humidity drops.
As a result, the coating prevents water from condensing on the surface. The system is highly effective in rooms where there are periods of low humidity, which allows moisture to be slowly released from the paint coating.
The RD-Aquasorb anti-condensation coating is designed for use on ceilings and upper wall sections in industrial areas where water vapor tends to condense and deposit. It is designed for moderate-to-heavy condensation that occurs periodically.
RD-Aquasorb is recommended for use on warehouse ceilings made of uninsulated coated sheet metal, in ship compartments, car washes, parking garages, bathrooms, and industrial kitchens, etc.
Coverage: 2–3 m2/l per coat
More information about RD-Aquasorb anti-condensation coating.
The RD-Aquasorb anti-condensation coating is water-based and does not emit unpleasant odors during application. It is intended for use on concrete, brick, steel, old moisture-resistant paint coatings, etc. When applied to steel surfaces, such as galvanized steel and/or weathered coated sheet metal, the following primer must be used: Monoguard anti-corrosive paint.
Coverage: Coverage depends on the coating thickness and the number of coats applied. The recommended coverage for the RD-Aquasorb anti-condensation coating is two coats of 0.4–0.5 L each, i.e., 0.8–1.0 L total per m².
Aesthetics: The RD-Aquasorb anti-condensation coating can be applied with a brush, roller, or airless spray. The coating absorbs water, so it cannot be painted over with other paints.
| Substrate: | System: | Cost: |
|---|---|---|
| Concrete | 1 x Unifix 10 m2/l + 2 x RD-Aquasorb anti-condensation coating 3 m2/l |
Check the cost |
| Steel | 1 x Monoguard 8 m2/l + 2 x RD-Aquasorb anti-condensation coating 3 m2/l |
Check the cost |
Notes:
RD-Aquasorb is a professional anti-condensation paint for metal garages, containers, and industrial facilities where water vapor condensation on metal surfaces is a problem. The coating is designed for use on the interior surfaces of metal roofs and walls, where it helps reduce condensation and water dripping from the ceiling.
Thanks to its properties, the RD-Aquasorb anti-condensation coating effectively reduces water vapor condensation, which often occurs in uninsulated metal garages, storage containers, warehouses, and other metal structures. This solution is particularly effective in spaces where there are periods of both high and low humidity, allowing the coating to dry out.
Before applying anti-condensation paint to sheet metal, properly prepare the surface and prime it with Monoguard anti-corrosion paint. The recommended system consists of one coat of Monoguard primer and two coats of RD-Aquasorb coating. This solution combines corrosion protection for the metal substrate with reduced water condensation on its surface.
