Previous keyboard_arrow_left
Next keyboard_arrow_right
Flexible liquid expansion joint filler - Rust-Oleum 5160
Flexible liquid expansion joint filler - Rust-Oleum 5160
Flexible liquid expansion joint filler - Rust-Oleum 5160
Flexible liquid expansion joint filler - Rust-Oleum 5160
Flexible liquid expansion joint filler - Rust-Oleum 5160
Flexible liquid expansion joint filler - Rust-Oleum 5160

Flexible liquid expansion joint filler - Rust-Oleum 5160

Rust-Oleum 5160 Flexible Expansion Joint Filler is a two-component, flexible, non-cracking polyurethane for repairing and sealing expansion joints and other floor gaps. The filler has very good resistance to mechanical and chemical factors. It is resistant to heavy traffic.

Rust-Oleum 5160 Flexible Expansion Joint Filler can be used for horizontal expansion joints in construction, industrial flooring, and other building seals, both indoors and outdoors. It is virtually odorless during application. It remains permanently flexible, allowing it to withstand the movement of concrete.

Rust-Oleum 5160 Flexible Expansion Joint Filler - key features:

  • permanently flexible
  • crack-resistant
  • very good resistance to mechanical and chemical factors
  • suitable for high traffic
  • withstands concrete movement and activity
  • highly resistant to wear
  • low odor
  • can be used both indoors and outdoors
  • drying time: to touch - 2 hours; to harden - 8-12 hours
  • application temperature: from 5°C to -35°C

Coverage: see below

More information about Rust-Oleum 5160 flexible liquid expansion joint filler.

PRODUCT TEMPORARILY UNAVAILABLE

Colour

Gray

  • Gray

Packaging

zł334.00 brutto

zł271.54 netto

zł167.00 brutto za 1 l

Capacity:

For 2 l packaging:

Slot width (mm) 2 3 4 5 6 7 8 9 10 20
Seal length (m) 455 202 114 73 51 37 28 22 18 9

The data presented contains a margin of error of 10%.

Joint width 5 - 10 mm: the depth of the applied joint should be the same as its width. Joint
width 10 - 20 mm: the depth of the applied joint should be 10 mm. Joint
width above 20 mm: the depth of the applied joint should be approx. 1/2 of the joint width.

Loading...