Elastoflex facade paint – waterproof, highly elastic (over 600%), crack-bridging paint for the protection and decoration of facades and walls.
By closing pores and gaps, Elastoflex protects the wall against moisture penetration and corrosion-accelerating compounds. It stops the concrete corrosion process. It maintains high elasticity in a wide temperature range. Thanks to this, the applied coating follows the movements of the concrete and does not crack.
Elastoflex facade paint is distinguished by its exceptional durability against weather conditions and good chemical resistance. Thanks to its vapor permeability, the wall "breathes" and releases moisture from inside the building.
Elastoflex paint is perfect for protecting new walls and facades as well as for renovation. Thanks to its properties, the paint effectively protects walls and concrete from damage over a long period of use.
Elastoflex facade paint is a water-based product. It contains few Volatile Organic Compounds and does not emit unpleasant odors during application. It is safe for people staying in painted rooms, so it can be successfully used in inhabited buildings.
Consumption:
Check:
Elastoflex facade paint is a certified product for the protection of facades and concrete:
Protection against weather conditions
Flexibility and durability
Concrete protection
Application and coverage
Safety
Renovation of exterior plaster
with Elastoflex waterproof paint
Painting new cement plaster
with Elastoflex waterproof paint
Renovation of old mineral plaster
with Elastoflex Quartz + Elastoflex system
Elastoflex Quartz + Elastoflex – flexible, waterproof, and
water-resistant paint for protecting and decorating walls
The table below presents Elastoflex facade paint systems depending on the consumption/thickness of the applied coating:
| Coating thickness: | Effect: | Cost: | Photo: |
|---|---|---|---|
| 300 - 400 g/m² (116 - 155 μm) |
provides very good color coverage, high coating elasticity, and high wall resistance to water and rain | check the cost of the system |  |
| 800 g/m2 (310 μm) |
bridges minor cracks, ensures tightness and excellent protection of walls exposed to frequent heavy rain | check the cost of the system |  |
| 1200 g/m2 (465 μm) + NX-2 reinforcing nonwoven fabric |
surfaces requiring the elimination of active cracks - up to 2 mm+ thick | check the cost of the system |  |
In most cases, Elastoflex is applied directly to the substrate without the use of primers. The paint usually adheres well to the substrate. The table below shows which primer should be used depending on the absorbency of the substrate:
| Substrate: | Recommended primer: |
|---|---|
| porous mineral surfaces, medium absorbency | Elastoflex diluted with 10% water |
| painted surfaces, non-chalking | Elastoflex diluted with 10% water |
| porous mineral surfaces, highly absorbent, e.g., dusty concrete | Unifix primer |
| painted surfaces, chalking | Unifix primer |
| compact mineral surfaces with low absorbency, e.g., architectural concrete | Multiprim primer |
Elastoflex flexible facade paint
Volatile Organic Compounds (VOC) content - 30 g/l
* Information on the level of vapor emissions (VOC) during application and until the paint is fully cured.
Emission levels from A+ (very low) to C (high).
Additional information on Volatile Organic Compounds.
