Hydrograff HP anti-graffiti paint - Noxan.pl

keyboard_arrow_left

keyboard_arrow_right

Hydrograff HP anti-graffiti paint

Hydrograff HP is a two-component, water-based, colorless polyurethane varnish with high chemical and mechanical resistance. The varnish creates an easily washable anti-graffiti coating that is resistant to abrasion, chemical cleaning agents, and solvents.

Graffiti and other paints can be removed quickly and effectively from the Hydrograff HP coating multiple times. To remove graffiti, use commonly available acetone and/or graffiti removers.

Hydrograff HP is easy to apply, does not yellow (UV resistant) and is virtually odorless during application (low VOC content). It is available in gloss and satin finishes.

Anti-graffiti paint is ideal in the vast majority of cases where protection against graffiti is required:

it protects the surface for 8-12 cleanings.

However, statistics confirm that if graffiti is removed quickly, it stops reappearing after the third wash. It is not worth the risk for vandals.
Can be used on virtually any insulated surface, including: plaster, concrete, natural stone, brick, steel, aluminum, copper, wood, tiles, surfaces covered with paint and varnish, etc.

Coverage: 10 m²/l per coat

System: 2 layers

More information about Hydrograff HP anti-graffiti paint.

Colour

Colorless

Packaging

Finishing

zł178.00 brutto

zł144.72 netto

zł178.00 brutto za 1 l

keyboard_arrow_down

Ask about the product

Description

Hydrograff HP anti-graffiti paint – key properties:

two-component, highly durable varnish
creates a colorless, easily washable anti-graffiti coating
easy removal of graffiti with acetone or graffiti removers
provides protection for 8-12 regular cleanings
water-soluble - no unpleasant odors during application
for indoor and outdoor use on virtually any insulated surface: mineral substrates, plaster, concrete, stone, brick, clean steel, galvanized steel, stainless steel, aluminum, wood, tiles, substrates covered with paints and varnishes (both water-based and solvent-based), etc.
Suitable for residential buildings, public facilities, and the food industry - PZH hygiene certificate and Gent certificate
application: brush, roller, air spray gun, or airless spray

Documentation:

Datasheets

Technical Data Sheet - detailed product properties and application method
Safety Data Sheet - base - chemical, health and safety, and transport information
Safety Data Sheet - hardener - chemical, health and safety, and transport information

Application instructions

Application instructions - practical step-by-step application guide

Declarations

Declaration of performance characteristics (according to ISO/ASTM)

Chemical and mechanical resistance

Chemical resistance sheet - results after exposure to selected substances
Abrasion resistance test - Taber Abraser, ASTM D4060: CS-10 wheels, 1000 g load, 1000 cycles; weight loss: 0.060–0.067 g/1000 cycles (60–67 mg)

Safety and environmental certifications

PZH Hygiene Certificate - confirming that Hydrograff HP may be used for: protecting floors and walls in workshops, garages, production halls, food production premises (without direct contact with food), public utility buildings, residential premises
Ghent University Certificate - concerning compliance with limits, in accordance with European Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food
LEED v4 VOC emissions compliance certificate - tests confirming low VOC emissions after 28 days
LEED, Green Seal - confirmation of low volatile organic compound (VOC) content in the product
Red List, Living Building Challenge - manufacturer’s declaration confirming the absence of Red List substances

Customers who bought this product also bought:

keyboard_arrow_left

keyboard_arrow_right

Epoxy primer/impregnant - HP Primer W221

from zł221.40

HP Primer W221 is a highly durable, water-based, two-component epoxy with excellent adhesion to various difficult surfaces. It can be applied to concrete, asphalt, as well as difficult-to-coat,...

Painting of tiles, glazes - Hydropox

from zł142.50

Hydropox tile paint is a two-component water-based epoxy designed for application with a roller or brush. The paint is easy to apply . It has very good adhesion ...

Decorative flakes for floors

from zł44.00

Decorative flakes scattered on resin floors improve the appearance of the floor and mask unevenness and imperfections in the substrate. Applying flakes also provides an additional anti-slip...

Monovar PU clear coat for walls

from zł144.50

Monovar PU is a water-based, single-component, colorless varnish with low VOC content, based on polyurethane dispersions. The varnish is resistant to moisture and UV radiation ....

On sale!

Wood primer - Teamac Wood Primer

from zł108.86

Teamac Wood Primer is a high-quality, universal wood primer. It is based on modified alkyds. It is characterized by very high efficiency - up to 13 m²/l. It is intended for general indoor...

Hydropox - NCS colors from the mixer

from zł142.50

On this page, you will find Hydropox paint in selected NCS colors, mixed to order using a mixer. Hydropox is a two-component, water-based epoxy resin dispersion...

The strongest assembly adhesive, instant - Siroflex Grip & Grab

from zł34.90

Extremely durable and permanently elastic Siroflex Grip & Grab mounting adhesive based on modern MS Polymer technology. It allows for quick and effective mounting ...

Paint for furniture - RD-Aquatop PU

from zł146.51

RD-Aquatop PU furniture paint is a modern, quick-drying (touch-dry and recoatable after just 1 hour), water-based, single-component polyurethane enamel with high resistance to...

keyboard_arrow_left

keyboard_arrow_right