Quartz flour type W12
from zł36.90
W12 quartz powder with a grain size of 1-120 µm used as a filler for epoxy and polyester resins .
W12 quartz powder is ideal for use with <a...
Primer for damp concrete - Dampshield Q124
Dampshield Q124 damp concrete primer is a two-component, high-strength primer based on epoxy resin. The primer is designed to protect damp and fresh concrete, which can have a moisture content of up to 90%. It adheres perfectly, seals the floor, and forces water to drain away. It can be applied to fresh concrete as early as three days after pouring.
Dampshield Q124 primer for damp concrete - key properties:
- based on a two-component epoxy resin
- can be applied to fresh, damp concrete - up to 90% humidity
- characterized by excellent adhesion to the substrate
- cuts off water - can be applied to floors and walls containing moisture
- is solvent-free, contains few VOCs - does not emit unpleasant odors during application
- can be used indoors without any problems
- allows for faster covering of the floor with ProFloor Plus epoxy coating or P101 polyurethane coating
- creates a durable coating
- resistant to forklift traffic
Consumption: min. 0.25 kg/m² for a dry layer thickness of 230 µm
More information about Dampshield Q124 primer for damp concrete.
Dampshield Q124 Primer should not be used under water-based topcoats such as Hydropox or Hydrograff HP.
Note: Epoxy primers such as Dampshield Q124 do not affect changes in concrete shrinkage. If a thick-film system is applied to a large concrete slab without a sufficient number of expansion joints, this may lead to cracking of the resin on the surface. However, this does not change the fact that the primer will adhere well to the concrete.
Dampshield has undergone independent laboratory verification. This confirms its full compliance with the requirements of BREEAM UK New Construction 2025 certification in the key category Hea 04 – Indoor air quality (VOC emissions). The product also meets the most stringent criteria for the exemplary level.
Key features:
Product characteristics
- blocks water
and forces it to escape by another route, - suitable for protecting outdoor concrete
including garage driveways, terraces and outdoor stairs
Resistance
- excellent adhesion to the substrate,
- the coating does not crack
or detach from the substrate, - creates a durable finish
resistant to UV radiation, - allows long-term protection of outdoor concrete
for a long service life, - the coating has high resistance
to chemical and mechanical loads
Aesthetics
- creates a durable surface finish
resistant to outdoor use
Application and safety
- can be applied to fresh, damp outdoor concrete
up to 90% moisture content, - for best results, we recommend using
nylon rollers for epoxy and polyurethane paints - 14 mm and 5-8 mm, - Confirmed compliance with BREEAM
(Indoor Air Quality)
Dampshield has undergone independent laboratory verification. It confirms full compliance with the requirements of the BREEAM UK New Construction 2025 certification in the key Hea 04 category – Indoor Air Quality (VOC emissions). The product also meets the most stringent criteria for the exemplary level
Instructional videos
Dampshield Primer can be applied to damp floors and difficult substrates such as ceramic tiles. We invite you to watch the instructional videos showing the application of the product.
Anti-slip outdoor floor
Paint for swimming pools and tanks
Painting tiles on very intensively used floors
Documentation:
Sheets
- Technical Data Sheet - detailed product properties and application method
- Safety Data Sheet - base - chemical, health and safety, and transport information
- Safety Data Sheet - hardener - chemical, health and safety, and transport information
Certificates
- Confirmed compliance with BREEAM - Indoor air quality - Dampshield has undergone independent laboratory verification. This confirms its full compliance with the requirements of BREEAM UK New Construction 2025 certification in the key category Hea 04 – Indoor air quality (VOC emissions). The product also meets the most stringent criteria for the exemplary level.
Application instructions
- Application instructions Dampshield Q124 + Profloor Plus - a practical step-by-step application guide
Customers who bought this product also bought:
Polyurethane surface - Hydrograff HP
from zł196.80
Hydrograff HP is a modern, water-based, two-component polyurethane coating with low VOC content. The coating is...
Uzin NC 150 self-levelling screed
from zł113.78
A self-leveling cementitious screed with very low emissions, designed for use in thicknesses up to 10 mm for smoothing and leveling...
Hydrograff HP anti-graffiti paint
from zł178.00
Hydrograff HP is a two-component, water-based, colorless polyurethane varnish with high chemical and mechanical resistance. The varnish...
Professional brush - PQ brush
from zł9.00
Professional reusable brush with a width of 38 mm and 75 mm . The bristles are made of polyester. They are flexible and allow for very good paint distribution on smooth...
Mildewicide - Antifungal primer Ag
from zł54.50
The Grunt Ag fungicide is a water-soluble preparation for priming walls and ceilings exposed to the growth of fungi and mold, based on acrylic resins with the...
Thinner 16
from zł65.50
Thinner designed for thinning, among others, Zinc Rich Primer zinc primer.
We...
Varnish for terraces and balconies - Monovar PU
from zł144.50
Single-component varnish for terraces and balconies with light to medium traffic in apartments and houses.
Monovar PU is a modern, single-component, water-soluble polyurethane varnish...
You might also like
High-strength epoxy flooring - ProFloor Plus
from zł922.50
ProFloor Plus is a two-component, thick-film, solvent-free epoxy paint. It creates a very durable floor protection. It has exceptional mechanical resistance and very high chemical resistance. It...
Polyurethane coating - P101
from zł282.90
P101 is a two-component, solvent-based polyurethane coating. It creates an aesthetic high-gloss finish. The coating...
